Products and additives for different operational applications in aeronautics and defence: de-froster and de-icer for aircraft and runways, anti-freeze agents with a high flash point for jet fuel, multi-purpose additive for diesel engines (single fuel concept), cleaning products and solvents, combustion enhancers, calibration fluids for kerosene pumps, etc.
DENATURIZED ETHYL ALCOHOL 95%
NYCOSOL 2 is ethyl alcohol 95% denatured.
APPLICATIONS
NYCOSOL 2 is intended for use in miscellaneous applications as cleaning, drying, deicing, etc.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
GOST 18300-87
TECHNICAL ISOPROPANOL
DESCRIPTION
Technical isopropanol.
APPLICATIONS
NYCOSOL 4 is intended for use as windscreens de-icer, solvent and degreasing fluid, cleaner for coated printed circuit board components and connectors (before reassembly).
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
NATO CODE S-737
AIR 3660
DCSEA 637/A
BA-PS-604
AL-11
BS 1595-1:1986
TT-I-735A Grade B
TL 6810-0002 Issue 6
FUEL ICING INHIBITOR, HIGH FLASH POINT
DESCRIPTION
NYCOSOL 13 is made of diethylene glycol methyl ether (DIEGME), also called methyldiglycol, and contains the antioxidant mandatory for MIL-DTL-85470.
APPLICATIONS
NYCOSOL 13 is intended to be added to jet fuel to prevent formation of ice crystals that may interfere with the operation of the aircraft fuel system at low temperature (filters, pumps and valves).
It has a high flash point and has replaced ethylene glycol methyl ether (EGME) as fuel icing inhibitor.
It meets the requirements of MIL-DTL-85740B and DEF STAN 68-252, and is DCSEA 745/B approved.
The treatment rate is from 0,07 to 0,15%.
NYCOSOL 13 can be used in replacement of fluid I (specification GOST 8313-88) and fluid I-M (specification OST 54-3-175-73-99) as anti-water crystallization agent in hydrocarbon fuels such as TS-1, RT and Jet A-1.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
NATO CODE S-1745
DCSEA 745/B
MIL-DTL-85470B
DEF-STAN 68-252 Issue 3 Amendment 1
AL-41
GOST 8313-88
OST 54-3-175-73-99
FUEL ICING INHIBITOR, HIGH FLASH POINT, WITH ANTI-CORROSION & LUBRICATING ADDITIVE
DESCRIPTION
NYCOSOL 131 is a ready-to-use blend of diethylene glycol methyl ether (DIEGME) with 1,5% of the anti-corrosion and lubricity improver S-1747.
APPLICATIONS
NYCOSOL 131 is intended to be added to jet fuel to prevent the formation of ice crystals at low temperature that may cause interfere with the operation of the aircraft fuel system (filters, pumps & valves).
It also contains the anti-corrosion and lubricity additive that is mandatory to obtain the military fuel F-34 (JP8) from the commercial fuel Jet A1 (F-35).
By using NYCOSOL 131 operators can prepare F-34 with only one blending operation and avoid inadequate dosing of the additive in the fuel.
The treatment rate is from 0,01 to 0,15%.
NYCOSOL 131 meets the requirements of DEF STAN 68-150 and is DCSEA 745/B approved.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
NATO CODE XS-1745
DCSEA 745/B
DEF STAN 68-150 Issue 2
AL-48
Our aviation fuels and lubricants ensure maximum performance and durability.
Bet on proven quality and technological solutions that meet the highest industry standards. Contact us today and take your business to new heights!”
