Multi-purpose or special-purpose mineral and synthetic greases for extreme applications (low and high temperatures, high speed and pressure, saline, corrosive, humid environments), compliant with civil, military aviation and industrial constraints.
To be applied to the airframe, slats, flaps, heavy loads, tail horizontal stabilizer (THS), actuators, bearings, doors, landing gears, wheels, jacks, rudders, line replaceable units (LRU) and also as an anti-seize or assembly compound, protection grease, etc.
DESCRIPTION
Nycolube 11B is a synthetic lubricating oil with a viscosity of 13 cSt at 40°C, based on neopolyol esters.
It is inhibited against oxidation and corrosion.
APPLICATIONS
• Corrosion protection
• Instrument and electronic equipment
• Automatic pilot (low fogging)
• General lubrication (moving aircraft parts: pins, locks, etc.)
SPECIFICATIONS * / OEM’s & Airframers reference
• Approved MIL-PRF-6085 F
• Approved AIR 3511/A
• Approved DEF STAN 91-49 Iss. 1 / OX-14
• Listed in Airbus CML 03AGB1
• Listed in ATR CML 03-007
• Listed in CFMI CP 5067
• Listed in Airbus Helicopters CM174
PETROLEUM LUBRICATING OIL
DESCRIPTION
NYCOLUBE 14 Grade 16 A is a petroleum lubricating oil with selected high effective additives and exhibits very good anti-wear, anti-oxidant and anti-corrosive properties.
APPLICATIONS
NYCOLUBE 14 Grade 16 A is specially designed for the lubrication of diesel engines without turbocharging.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
Substitute to GOST 25770-83 / M 16 IKhP-3
Substitute to TU U 23.2-00152365-229:2006
GALOL M-4042 TD
GARANT M-4042 VT
Substitute to GOST 6360-83
MT-16P
MT-16PC
SYNTHETIC LUBRICATING OIL
DESCRIPTION
Nycolube 21 is based on a blend of a petroleum base stock and a polysiloxane.
APPLICATIONS
Nycolube 21 is a general aviation lubricant and more specifically intended for the lubrication of bearings and friction assemblies and of gyroscopic and electronic instruments. Its operating temperature range is -65°C to +170°C.
Nycolube 21 can also be used instead of OKB 122-3 / 122-4 / 122-14 – types 132-07 / 10 / 19 / 20 – TU 6-02-897 lubricants.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
Substitute to Type 132-08
Substitute to OKB 122-5
Substitute to Type 132-21 (ex. OKB 122-16)
Substitute to GOST 18375-73
Substitute to TU 6-02-897-78
DESCRIPTION
Nycolube 30 is a petroleum lubricating oil with a minimum viscosity of 11 cSt at 40°C.
It is inhibited against corrosion and has water-displacing properties.
APPLICATIONS
Nycolube 30 is a general purpose preservative oil for military equipment and is
primarily used to protect weapons of all calibers from rust during storage.
Nycolube 30 remains fluid at very low temperature and can be used down to -50°C
in applications where lubrication capability and rust-protection are required.
SPECIFICATIONS * / OEM’s & Airframers reference
• Meets OX-18
• Meets MIL-PRF-32033 A Amd1 Type I (ex VVL-800)
• Listed in Airbus CML 03BCB1
• Listed in Airbus CML 03BDB9
PETROLEUM LUBRICATING OIL
DESCRIPTION
Nycolube 122 is based on a petroleum base stock and contains selected additives to improve its properties.
APPLICATIONS
Nycolube 122 is intended to be used as a transmission fluid in planetary reduction gears; it is usable throughout the year in countries with a hot or temperate climate.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
Substitute to TU 38 101277-85
Substitute to TU 38 1011280-89
Substitute to MT-8p
Substitute to TSZp-8
CLEANER, LUBRICANT AND PRESERVATIVE WEAPON OIL
DESCRIPTION
NYCOLUBE 127 CLP is a highly penetrating, mobile liquid operating at temperatures ranging from –54°C to +150°C, based on synthetic oil and containing anti-corrosion and anti-wear additives. It has excellent water-displacing properties as well as high flash point and very low odor.
APPLICATIONS
Cleaning, lubrication and preservation of both small and large calibre weapons generally fitted on ground vehicles or fighter aircrafts.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
NATO CODE S-758
Meets MIL-PRF-63460 F Type A
Approved BT-PS-661A (Belgium)
Equivalent to DCSEA 501/A
DESCRIPTION
Nycolube 210 is a high performance solvent free two stroke engine oil based on a complex ester and
a package of ashless additives improving the lubricity and oxidattion resistance.
APPLICATIONS
Nycolube 210 is intended for the lubrication of two stroke gasoline engines operating with unleaded regular fuels. It has to be used
at the manufacturer’s recommended fuel/oil ratio (up to 1/100).
Nycolube 210 has been qualified with the National Marine Manufacturers Association (NMMA) according to TC-W3 standard
(approval No RL 91506H).
Although Nycolube 210 has been developed for water cooled two stroke engine, it can be used in air cooled 2-stroke engine as well,
meeting the requirements of API TC+ standard. It has successfully passed the Husqvarna 266 engine test.
ADVANTAGES
• Excellent lubricity and detergency properties (engine cleanliness)
• Prolongs engine life
• Biodegradable
• Ashless
• Universal: non-outboard and outboard engines
SPECIFICATIONS * / OEM’s & Airframers reference
• Approved DCSEA 242/C
• Approved NMMA TC-W3
• Approved API TC+
Particularly recommended for all demanding 2-stroke engine applications, such as direct injection motorcycle engines, NYCOLUBE® 248 is also suitable for chainsaws, lawn mowers, mopeds, scooters and snowmobiles in severe conditions. NYCOLUBE® 248 exceeds the performance level of ISO L-EGD and JASO M345 FD standards. NYCOLUBE 248 shows outstanding performance levels in both Piaggio Hexagon test and DiTech Aprilia direct fuel injection engine test.
NYCOLUBE® 210 EL is a universal high-performance biodegradable synthetic 2-stroke engine oil that provides high lubricity, excellent detergency and cleanliness. NYCOLUBE® 210 EL is an ashless formulation for exhaust gas system protection and is designed for water-cooled or air-cooled 2-stroke engines operating on unleaded or alkylated fuels.
DESCRIPTION
NYCOLUBE 294 is a fully synthetic engine oil manufactured from high performance
synthetic base oils with a blend of selected system of additives.
APPLICATIONS
NYCOLUBE 294 is intended for heavy duty military applications operating in wide
temperature range.
The product is suitable for the lubrication of engines, hydraulic systems, automatic and manual gearbox using EMT-8
type oil, transmissions, clutch and steering systems of military vehicles requiring O-1178 performances.
Due to modern and complex additive system (detergent-dispersant, oxidation, wear, corrosion, foam inhibitors)
providing full engine protection, this product enables to keep internal engine parts clean, reduces wear, etc.
ADVANTAGES
• Extremely low pour point
• Excellent cold flow properties
• Very high viscosity index
• Good shear stability
SPECIFICATIONS * / OEM’s & Airframers reference
• Approved TL 9150-0080 Ausg.4 (Germany)
• Meets ACEA E3
• Meets ZF Class TE ML-13
• Approved in RENK GmbH transmissions
• Substitute to EMT-8 Type
NYCOLUBE® 348 is an ashless formulation, particularly recommended for all demanding 2-stroke engine applications, such as direct injection motorcycle engines. NYCOLUBE® 348 is also suitable for chainsaws, lawn mowers, mopeds, scooters and snowmobiles in severe conditions.
NYCOLUBE® 436 is a multigrade diesel engine oil based on highly refined mineral base oils, fortified with detergent-dispersant, anti-wear, antioxidant, anti-corrosion and viscosity improver additives. NYCOLUBE® 436 is especially used in land forces plateforms such as tanks, trucks and light vehicles. It is suitable for use in very cold operating conditions (down to -20°C) as well as hot ambient temperature (+50°C).
SYNTHETIC HYDRAULIC FLUID
DESCRIPTION
Nycolube 934 is a blend of silicone fluids and synthetic esters and contains antioxidant and anti-wear additives.
APPLICATIONS
Nycolube 934 is an hydraulic fluid designed to be used over temperatures ranging from -60°C to +200°C.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
Substitute to 7-50S-3
Substitute to GOST 20734-75
NYCOLUBE® 3060 is a formulated lubricant specially designed for air compressor applications. Its excellent thermal stability and its very good lubricity provide excellent performance levels to the system. NYCOLUBE® 3060 is recommended for applications requiring long-term service with minimal deposit formation.
HELICOPTER GEAR OIL
DESCRIPTION
Nycolube 3525 is a petroleum oil with a viscosity of 9 cSt at 100°C and contains high performance extreme-pressure additives.
APPLICATIONS
Civil and military helicopter gearboxes operated in temperate or warm climates.
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
NATO CODE O-155
MIL-PRF-6086F Grade M
DCSEA 255/A
DEF STAN 91-112 Iss.2
OEP 70
Particularly recommended for high temperature applications such as glass mills, cement, chipboard, and laminate, plastic film or fibre glass industries, NYCODIEL® 5650 HT offers the benefits of very low volatility combined with high-temperature resistance and exceptional cleanliness.
Particularly recommended for high temperature chain oils used in the food industry, where incidental contact of oil with food may occur, NYCOLUBE® 5951 FG can be used at temperature exceeding 300°C and it shows exceptionally high flash points. It combines excellent resistance to thermo-oxidation and ultra-low volatility.
INSTRUMENT MINERAL LUBRICATING OIL
DESCRIPTION
Nycolube 7870 is a mineral lubricating oil with a viscosity of 10 cSt at 40°C. It is inhibited against oxidation and corrosion.
APPLICATIONS
Corrosion preventive oil for instruments and electronic equipment like automatic pilot. Multipurpose lubricating oil for military and civil aircrafts and helicopters (pins, locks, etc.)
SPECIFICATIONS, OEMS & AIRFRAMERS REFERENCE
NATO CODE O-142
Approved MIL-PRF-7870 E
Approved DEF STAN 91-47 Iss. 1 / OM-12
Listed in Airbus CML 03BBB1
Listed in Airbus CML 03BDB9
Listed in ATR CML 03-001
Listed in Boeing CML D00091
